+++ title = "Preparing to install" lastmod = "2017-06-01T13:45:24+03:00" +++ # Preparing to install The first step to installing Solus is acquiring the correct media. The Solus Project provides ISO images, which contain the contents of Solus for installing. ## Getting the ISO You can download a Solus ISO by going to our [Download page](/download). --- ## Getting the Right Tool There is a multitude of tools which enable the writing of our ISO image to DVDs or USB thumb drives. Below, we break it apart across Linux, Windows and macOS. ### Linux #### DVD We recommend using [Brasero](https://wiki.gnome.org/Apps/Brasero) for writing the ISO to a DVD. #### USB ##### Graphical Tool We recommend using [Gnome Multi-Writer](https://wiki.gnome.org/Apps/MultiWriter). Please note that unetbootin will **not** work. ##### Command-Line For those comfortable with the command-line / terminal, we will walk you through using `dd`. ### Windows #### DVD You can easily burn an ISO image to a DVD, on Windows 7 and newer, by using Window's built-in file manager (Explorer), right-clicking on the ISO image file, and clicking Burn disk image. #### USB You can easily burn an ISO image to a USB by using graphical tool [Rufus](https://rufus.akeo.ie/). ### macOS #### DVD On a Mac, burn an ISO image to a DVD by using the macOS “Finder” file manager, right-clicking on the ISO image file, and clicking “Burn Disk Image”. #### USB ##### Graphical Tool One of the easiest ways to burn an ISO image to a USB thumb drive is by using a graphical tool called [Etcher](https://etcher.io/). ##### Command-Line For those comfortable with the macOS Terminal app, we will walk you through using `dd`. --- ## Writing the ISO To write the ISO, you will need: 1. Either a blank DVD or a USB drive larger than 1GB. 2. If using a USB, the ability to boot from the USB. 3. ISO from the "Getting the ISO" section. ### Linux #### DVD 1. Insert blank DVD (DVD-R or DVD+RW is suitable) into your DVD writer. 2. Open Brasero. 3. Select the option “Burn image”. 4. Click the “Click here to select a disc image” button and using the file dialog, choose the ISO. 5. Ensure the correct DVD is selected in the “Select a disc to write to”. 6. Click Burn and wait. 7. Upon seeing “Image successfully burned to DVD”, click Close. #### USB ##### Graphical Tool Upon opening Gnome MultiWriter, you will likely be shown a window similar to the one below, in the event your USB drive is already plugged in. {{< altimg "start.jpg" "help-center/installation/preparing-to-install/" >}} If your USB drive is not plugged, you will be prompted with an image indicating to plug it in. Next, click the "Start Copying" button, and you will be prompted to select the ISO. Choose the ISO you downloaded in the "Getting the ISO" section. The USB will automatically be written to. {{< altimg "writing.jpg" "help-center/installation/preparing-to-install/" >}} Upon completion, you will be prompted with the following dialog and your USB is now ready for use. {{< altimg "done.jpg" "help-center/installation/preparing-to-install/" >}} ##### Command Line Please follow the steps below, which guide you through installation using the utility `dd`: First, insert the USB drive into your computer and open your Terminal. Proceed to type `lsblk` into your Terminal. It should output something along the lines of: ``` bash NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 111.8G 0 disk ├─sda1 8:1 0 350M 0 part ├─sda2 8:2 0 39.7G 0 part └─sda3 8:3 0 71.8G 0 part / sdb 8:64 1 7.5G 0 disk ├─sdb1 8:65 1 712M 0 part └─sdb2 8:66 1 17.2M 0 part ``` You will see one disk, in my case `/dev/sdb`, that is roughly the size of my USB Drive. Yours should be similar (difference being in size). Write this device down somewhere. Next, locate the downloaded ISO. It will most likely be in your Downloads folder. In the event that it is, type: `cd ~/Downloads` If it is **not** in your Downloads folder, use `cd` to navigate to the correct step. **Dangerous Below** This is where we overwrite the contents of your USB drive so please ensure you identified the current drive in the `lsblk` stage above. My command is below, however you may need to replace `sdb` with the drive we located above: ``` bash sudo dd if=Solus-2017.04.18.0.iso of=/dev/sdb bs=1M;sudo sync;sudo eject /dev/sdb ``` This will write the contents of the ISO to the thumb drive so you can boot it and also make sure the data is synchronised so you can eject the USB safely. ### Windows #### DVD 1. Open Window's built-in file manager (Explorer). 2. Right click on the ISO image file and click Burn disk image. 3. Select the correct Disc burner. 4. Click Burn. #### USB 1. Open Rufus. 2. Ensure your device is correct by checking the contents of the Device dropdown. 3. Click the CD icon found in the image below, and select the ISO. 4. Untick all options except "Create a bootable disk using" and use the dropdown to select "DD Image". 5. Click Start. {{< altimg "rufus.jpg" "help-center/installation/preparing-to-install/" >}} ### macOS #### DVD Since OS X El Capitan (10.11), the easiest way to burn a DVD is: 1. Insert your DVD and open Finder. 2. Right click on the ISO image. 3. Click on “Burn Disk Image ‘Solus-2017.04.18.0-Budgie.iso’ to Disc…” 4. Then click “Burn”. {{< altimg "mac-burn-dvd.jpg" "help-center/installation/preparing-to-install/" >}} #### USB ##### Graphical Tool 1. Open Etcher. 2. Click on “Select image” and then select the ISO and click “Open”. 3. Etcher will automatically select your USB drive. If it has selected the wrong one, click “Change” and select the correct one. 4. Click “Flash!”. 5. You may be prompted for your macOS user password. 6. Once Etcher has finished it is safe to remove the USB drive. {{< altimg "mac-etcher.jpg" "help-center/installation/preparing-to-install/" >}} You may see a message stating “The disk you inserted was not readable by this computer.” once Etcher finishes, this can be ignored. ##### Command Line First, insert the USB drive into your computer and open Terminal (found in Applications/Utilities). Now you'll need to identify your USB drive by listing your storage devices with the following command: ``` bash diskutil list ``` You should see output similar to this: ``` bash /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_HFS Macintosh HD 999.3 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *15.6 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_HFS Ultra 15.3 GB disk1s2 ``` From this output, we can see the USB drive is listed as - `/dev/disk1 (external, physical)`. In this example, the IDENTIFIER is `disk1`. Please note, your USB drive may have a different identifier. You should be able to tell which is your USB drive by checking the name and size. macOS usually auto-mounts USB drives so you’ll need to unmount it first before proceeding. Use the following command and replace `IDENTIFIER` with the correct identifier we found in the `diskutil list` step. ``` bash diskutil unmountDisk /dev/IDENTIFIER ``` Now navigate to the folder that has the downloaded ISO. This could be your Mac’s Downloads folder. The following command will get you there: ``` bash cd ~/Downloads ``` **This step is dangerous. Using the wrong drive identifier could result in data loss.** We will use the `dd` command to write the contents of the ISO to the thumb drive. Replace `IDENTIFIER` in the command below with your drive identifier. Note the extra `r` before the identifier (i.e `rdisk1`). This is for raw mode, which along with bs=1m, makes the transfer faster. ``` bash sudo dd if=Solus-2017.04.18.0-Budgie.iso of=/dev/rIDENTIFIER bs=1m ``` Be patient! After a few minutes you’ll receive a message saying how much data was transferred. You can now safely eject the usb drive. ``` bash diskutil eject /dev/IDENTIFIER ``` --- ## Boot the Image Now it is time to restart your computer to boot the DVD or USB. Most computers will automatically boot from DVDs and USB, however if you experience issues booting the media, you may need to select to boot from DVD or USB. This is usually accessible by pressing `F9` or `F12` while your computer is booting. On some devices it may also be `ESC`. Macs will boot to the "Startup Manager" by holding down the Option (Alt) key. The DVD or USB drive will most likely show up as "EFI Boot".